Connect an Epson Projector to a Laptop

To connect the laptop to your projector you need to locate the video input slots at the rear of your projector. Unplug your projector and do the following:

• The video cable with blue ends should be connected to the blue video pin socket at the back of the projector.

• The other end of the video cable is connected to the left side video pin socket at the rear of the laptop.

• Then connect the projector power cable of the projector. The red power light on the projector will turn on when you plug it on the power outlet.

After you have connected the laptop input and plugged on your projector,

• Connect the power cable of your laptop and turn it on.
• Then turn on your projector, and you will see an 'Epson' logo on your screen
• You can now adjust the settings, height, view, etc. of the projector.
  

NOTE: The Windows Desktop should be visible.